Diagnose and configure modules in your Ford Focus 2 or C-Max I with ease. Connecting via ELM327 or ELS27, you can access and interact with various CAN-bus modules:
Engine Control Module (ECM): Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM)* for the following engines:
- ESU-411/418 (1.8 125/2.0 145)
- SIM28/29 (1.4 80/1.6 100/115)
- ESU-121/131 (1.8 120/2.0 145)
Instrument Panel Cluster (IPC): Retrieve module information, read and clear DTCs, configure settings, reboot the module, adjust odometer readings, and perform odometer corrections*.
Brake Control Module (BCM): Access module information, read and clear DTCs, configure settings, reboot the module, reset Dynamic Stability System (DDS) calibration, and perform brake bleeding*.
Body Control Module (BCM): Access module information, read and clear DTCs, configure settings*, and reboot the module.
Central Gateway Module (CGM)/Safety Restraint Control Module (SRCM): Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data*.
Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM*.
Climate Control Module (CCM): Access module information, read and clear DTCs.
Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.
*Some features require the full version of the application.
For full application functionality and access to additional modules, a simple modification to your ELM327 adapter is recommended. Instructions can be found here: Http://forffclub.narod.ru/index/0-2
ELS27 adapters can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT-2, use the ELS27 Baudrate utility to set it to 2,000,000.
